Grips

• Greater reduction of direct light
• Softens effect by introducing ambient bounce
• Approximate light loss is 1.0 Stops

• Silver
• Soft reflector

• Soft white reflector on one side
• Flat black on the other

• Soft white reflector on one side
• Flat black on the other

• The Doorway Dolly will move through a full range of travel with either the Push Bar or Pull Bar.
• The platform can be flipped over for even lower camera positioning.
• Ground clearance is 9″ or 3″ when inverted.
• The removable side boards add an extra 10″ per side for increased platform width.
• The wheelbase is 28-1/4″ wide and the platform length is 51″. Hot Buttons can be easily installed to accommodate standard 24.5″ width track.
• The Doorway Dolly with Turret provides a 360 degree swing of both the camera mount and operator with all the functions of the standard dolly system.
• Doorway Dolly – Weight: 53 Kg
• Doorway Dolly with Turret – Weight: 89 Kg
• Weight Capacity 363 Kg

• Heavy diffusion of light
• Considerable amount of ambient bounce
• Approximate light loss is 1 Stop Matthews
• Hemmed with nylon webbing and grommets

• Soft white reflector on one side
• Flat black on the other

• Silver
• Soft reflector

• Greater reduction of direct light
• Softens effect by introducing ambient bounce
• Approximate light loss is 1.0 Stops

• Solid Black
• Eliminates light and reflections
• High quality duvetyne

• Color: White
• Slightly softens and diffuses light without much reduction of light intensity
• Introduces a significant amount of ambient bounce
• Approximate light loss is 1 Stops

• Color: White
• Slightly softens and diffuses light without much reduction of light intensity
• Introduces a significant amount of ambient bounce
• Approximate light loss is 0.6 Stops

• Heavy diffusion of light
• Considerable amount of ambient bounce
• Approximate light loss is 0.25 Stops Matthews
• Hemmed with nylon webbing and grommets

• Flat white reflector
• Used for heavy diffusion of light
• For Digital Photographic or Video Use

• Color: White
• Slightly softens and diffuses light without much reduction of light intensity
• Introduces a significant amount of ambient bounce
• Approximate light loss is 0.6 Stops

• Solid Black
• Eliminates light and reflections
• High quality duvetyne

• (2) Frames
• (1) Single Scrim / Net (1/2 stop)
• (1) Silk Diffusion
• (1) Silver Lame Reflector (silver / white reversible)
• (1) Solid Black
• (1) Carry Bag

Stainless Steel Track Straight 4 Foot Section
PN 397070 – Weight: 22.5lbs

Stainless Steel Curved Track 8 Foot Section – 20′ Diameter
PN 397059 – Weight: 30.5lbs

Stainless Steel Track Straight 8 Foot Section
PN 397065 – Weight: 36lbs

CENTIPEDE II features 8 carriages with four wheels each.

Splitting the large carriages into two smaller carriages allows each individual carriage

to pivot quicker and more precisely to accommodate the changing

radiuses of curved track layouts.

The STABIL Light was developed to support gimbals between 2-7kg (4.4-15.4 lbs). It will help stabilize handheld shots to a certain degree while protecting your back.  This enables you to operate the gimbal and camera for much longer periods of time. It can be locked in 90 degrees to function as a ‘normal’ Minimax upper arm.

• Holds camera rock steady
• Absorbs vibration
• Dimensions: 9″ x 9″
• Canvas 3 pockets and a pouch

Easily tilt the the Angle Plate’s platform from 0-95 degrees by utilizing the locking levers to securely mount the platform into position.

For minor angles, the low-angle locking levers add stability to prevent slipping.

The HD Angle Plate also features a 360-degree swivel.

Load Capacity 22Kg

he E-jib arm is an ergonomic jib, constructed of high grade Aluminium which has been hard anodised for strength and integrity.

Adjustable both front and rear of the jibs pivot point to make the unit easy to operate.

The counterweight spindle is made to adapt standard weightlifting weights (Barbell) with a diameter of 30 mm. or 1 inch.

Assembled in both over- and undersling configurations for optimum camera positions.

The total weight of the case and E-Jib is 16 kilo. The Jib-arm folds down till 72 cm. and weighs no more than 11 kg.

The Prosup E-Jib folds into an ergonomic configuration which allows easy packing into its Pelicase by a specially designed foam insert which also allows transportations of counter weights.

• Short set-up times
• Travel-friendly transport dimensions, light weight
• Folding base plate with two spur widths
• Sliding camera shots thanks to the V-shape of the speed wheels
• Self-centering round bars tool-less connection
• Curved rails optionally available
• Weight 11 Kg
• Dimensions 80cm X 70.5 cm

• Variable Size: 20-80 cm
• Pro Clamps – S – Clamping Depth 80 mm
• Ergonomically designed three-component handle allows the end-user a higher torque transfer to the workpiece
• A patented floating lock minimises the risk of the lower jaw sliding down the bar
• The industrial design allows the clamp to be freestanding
• Bar Dimension 25 x 6 mm / Holding 350 kg Pressure

• Vacuum Pad: Concave, 10″ [25 cm] diameter (model G0750)
• Load Capacity: 79 kg
• Aluminum Plate Dimensions: 127 x 152 x 6 mm
• Supplied with 2-3/4″ [70 mm] Standoffs (4 ea) and 1/4-20 x 3-1/2″ [89 mm] Screws (4 ea)
• Tapped Holes: 1/4-20 and 3/8-16 Threads

• Vacuum cups with a 3/8-16 threaded shaft
• Added leveling center angle mounting bracket
• Features 6″ vacuum/suction cup camera mount
• Attach and release in seconds

• Construction: Aluminum
• Load Capacity: 1.8-4.5kg
• Free floating precision Gimbal
• Dynamic Spin 360 degree
• Weight: 1.4kg

• For Reflectors Up to 60″
• 5/8″ Stand Mount w/ Adapter

• 360 Degree Rotation
• Interlocking Lever
• Ball and Socket 5/8″ pins
• 1/4″-20 and 3/8″-16 Female Thread
• Pins Have Flat Sides for Secure Lockdown

• for small dedo light
• Maximum Height 190 cm
• Min Height 49 cm
• Closed Length 48 cm
• Max Payload 1.5 kg
• Weight 960 g
• Leg Sections 5

• Gaffer Grip  works on diameters from 15mm to 80mm.
• supports a payload up to 10kg.
• Features two attachments, 16mm and 17mm.

• 6×6 Snap-A-Part Light Duty Frame
• 2 Light Heavy Double Riser Stands
• 2 Hollywood 2-1/2″ Grip Heads
• 1 6×6 Artificial Silk
• 1 6×6 Black/White Griffolyn
• 1 Lighting Control Carrying Bags made of1000 denier polyester fabric
• Kit Weight 35 lbs (16 kg)

• for 800 Lights
• Various Brands: Kupo, Matthews, Manfrotto
• Maximum Height 2.44 m
• Minimum Height 86 cm
• Weight 1 kg
• Maximum Load 3.6 kg

• Load Capacity 15 kg
• Working Height 8.9 cm
• Weight 1 kg

The EngRig is the best solution for ”front heavy” full size shoulder camcorders.
The camera front is supported by the “Active Suspension Support Pod” and a comfortable padded support belt.
The support attachment connected to the camera bottom allows normal use of the original Quick Release plate or Matte Box rods.
The adjustable support point can balance virtually any shoulder camera size.
The EngRig takes off the load from the arm, and most of the load from the shoulder.

• Minimum Length: 1.45m
• Maximum Length: 2.05m
• Maximum Camera payload: 25Kg

• For DSLRs and Camcorders up to 4 Kg
• Relieves Strain from Your Arms
• Helps Get Steady Shots
• Attaches to Camera by Rubber-Grip Hook
• Height Adjustable Support Bar
• Top-Quality Marlow Rope
• Adjustable Rope Resistance
• Protective Transport Case Included
• Case Fits Easyrig and Camera

• Support for Small Video Cameras
• 2-7 kg Payload Range
• Redistributes Camera Weight
• Relieves Strain from Your Arms
• Helps Get Steady Shots
• Height Adjustable Support Bar
• Smooth Support Rope Movement
• Pivoting Upper Arm
• Includes Carrying Bag

• 5-17 Kg Load Capacity
• Reduces Strain on Arms, Neck & Shoulders
• Adjustable Line Tension
• Gimbal Rig Vest

• Fast and Portable Dolly System
• Up to 2.5 m track’s length
• Aluminum Construction
• Black Industrial Finish to Minimize Reflection
• Soft Polyurethane Wheels
• ABEC-7 Precision Bearings
• Wheels Machined Round

• The Tango Roller is a lightweight (only 8Kg) roller system for camera weighs up to 15 kg.
• Easy to assemble
• Track length up to 1.5m

• Full Metal body
• Carbon Steel bearings&rods
• 3/8″ 1/4″ famale adpater*5 (3 at bottom,1 side each)
• 3/8″ male head on slide block

• 3/8″ threaded attachments (Camera ballheads standard)
• Net Weight:1200g
• 31*16.5cm when setted

• Optimal Stability for Professional Still & Video Recording
• Securely Attaches to Any Smooth, Non-Porous Surface
• 360° Tilt, Turn and Rotation
• Ruggedly Constructed to Endure Any Shooting Environment
• Supports Cameras up to 5.44 Kg
• Universal ¼”-20 Photography Mount

• Mounts to Any Smooth, Non-Porous Surface or Object
• Lightweight, Rugged & Secure
• 3 in. Industrial Suction Cup
• 360° Tilt, Turn and Rotation
• Supports Cameras, Camcorders & Flashes up to 1.8Kg

Various sizes and shapes and colours available

Comes as fix White matte or shining silver or

portable round or ellipse shaped

• 4.2″ Joint-to-Joint Length
• 7.5″ Fully Extended Length
• Single-Point Locking Mechanism
• 1/4″-20 & Shoe Mounts

• Various Brands: Kupo, Matthews, Avenger
• Maximum Working Height 1.9 m
• Minimum Working Height 85 cm
• Weight 7 kg
• Load Capacity 33 kg
• Mounting Options 5/8″ Stud / 1-1/8″ Receiver
• Number of Sections 3

• Various Brands: Kupo, Matthews, Avenger
• Maximum Working Height 1 m
• Minimum Working Height 65 cm
• Weight 4.5 kg
• Load Capacity 30 kg
• Mounting Options 5/8″ Stud / 1-1/8″ Receiver
• Number of Sections 2

• Various Brands: Kupo, Matthews, Avenger
• Weight 6200 g
• Closed Length 134 cm
• Footprint Max Diameter 95 cm
• Leg Sections 3
• Maximum Height 300 cm
• Max Payload 10 kg

• Roller stand with folding base
• Robust
• Load capacity: 12kg

• Weight 430 g
• Clamp range – max. (round tube) 55 mm
• Clamp Range Min Round Tube 13 mm
• Max Payload 15 kg

• Multiple Jaw Sizes: 2″, 3″ and 6″
• Construction 1010 Chrome-plated steel
• Baby (5/8″) Pin for mounting

• Various Brands: Kupo, Matthews, Avenger
• Weight 5600 g
• Closed Length 84 cm
• Footprint Max Diameter 95 cm
• Leg Sections 3
• Maximum Height 155 cm
• Max Payload 10 kg
• Min Height 84 cm

• Various Brands: Kupo, Matthews, Avenger
• Maximum Working Height 3.5 m
• Minimum Working Height 1.7 m
• Weight  12 kg
• Load Capacity 40 kg
• Mounting Options 5/8″ Stud / 1-1/8″ Receiver
• Number of Sections 3

• for 1K Lights
• Various Brands: Kupo, Matthews, Manfrotto
• Maximum Working Height3.3 m
  Minimum Working Height 95 cm
  Weight 1.8 kg
  Load Capacity 10 kg
  Mounting Options 5/8″ Stud
  Number of Sections 4

Various size available:

• 50x30x40 cm
• 50x30x20 cm
• 50x30x10 cm
• 50x30x5 cm

• “2.5
• “4.5

• Closed Length 71.26 in (181 cm)
• Minimum Extension (Height) 70.25 in (178.44 cm)
• Maximum Extension (Height) 149.61 in (380 cm)
• Maximum Load 66.14 lbs (30 kg)
• Footprint Diameter 50.39 in (128 cm)

• We provide ladders : from 1.3 m and up to 3.75 m

• Round and frame weights
• Up to 15 Kg (each)

• 5 Kg